Entry Level Manufacturing Operator
Company: National Oilwell Varco
Location: Shafter
Posted on: June 20, 2022
|
|
Job Description:
Summary: Assists assembly crews in grinding, cutting, repairing,
cleaning, stenciling, assembling, finishing tanks, accessories, and
products. Wets out resin and glass materials, rolls air bubbles out
of layups. Uses power tools, assembly jigs and material handling
equipment. Maintains materials, supplies, equipment and resins used
in fabrication, repair, and assembly of tanks. Assist in lays out
and matches shells. Assembles, repairs, and finishes fiberglass
finished goods and in process goods by constructing and inspecting
for quality defects in accordance with specifications, work
standards, product standards, and acceptable quality levels and
coordinates proper corrective action.Essential Duties and
Responsibilities Cuts and hand lay up glass materials to proper
size. Operates material slitting equipment, cuts to length and
operates the saw or other manner of material cutting to size for
later use in tank, sump, or product construction or FS material
needs. Operates equipment and materials handling equipment;
including but not limited to shell cut off saw, pencil grinders,
die grinders, 4" grinders. 7" grinders, wet grinders, manway and
other holesaws, air movers, floor jacks, mechanical electric and
pneumatic hoists, drill press, material saw, material slitter, tank
turners, forklifts, air monitors, air movers, emergency eyewash,
collar and manway installation jigs, respirators, dotco saws,
diatrim saws, and vacuum pump. Takes direction from the operator in
fabricating, preparing and installing tank, sump, and product
accessories. Cuts, grinds, smooths, fabricates, prepares, patches,
installs parts as needed for secondary hand layup bonding
(including but not limited to center joint seams, offline seams,
fixtures, endcaps, collars, manways, access openings, nozzles,
strap clips, reservoirs, sumps, fittings, pump platforms, ladders,
OWS plates, bulkheads, deflector plates, PVC stubs, rope lugs, lift
lugs, manway extensions, sump construction, etc) Performs secondary
bonding procedures in accordance with parts being constructed by
the work crew (typically but not always an assembly operator and an
assembly fabricator). Uses power tools and equipment to assemble
and repair fiberglass tanks, sumps, and parts. Wets out materials
and rolls air bubbles out during layup Cuts materials using
template, straight edge. Etc. Controls inventory and storage of
materials, rolls and sheet per fiberglass operation build schedule
requirements. Assists in preparing parts, products, and accessories
for shipment, as directed by appropriate personnel. Visually
inspects, takes measurements and other process checks and notifies
appropriate personnel of quality issues. Mixes resins and catalysts
according to conditions to insure proper laminate cure. Saturates
fiberglass materials, wets out bonding surfaces prior to layup,
applies resin wetted materials, rolls out layup to remove air and
make quality secondary bonds. Assist in the matching and layout of
shells per specifications (including but not limited to identifying
and locating fittings and accessories, cutting and grinding, etc
for secondary bonding). Performs layouts (including but not limited
to manways, fittings, deflector plates, nozzles, collars,
reservoirs, sumps, pump platforms, ladders, OWS plates, bulkheads,
lift lugs, rope lugs, and PVC stubs).Marks, stencils and labels
product per specification. Assists in the lay out, fabrication and
assembly of tanks, sumps, and products from shop drawings. Checks,
cleans, performs minor maintenance on tools and equipment to insure
applicating efficiencies. Cleans rollers and tools. Applies guides,
lugs, marks, stencils, labels as per instructions. Operates
material handling equipment as needed. Notifies supervisor or
maintenance department of any issues in a timely fashion.
Participates in the safety and good housekeeping within the
plant.Physical demands and work environment The physical demands
described here are representative of those that must be met by an
employee to successfully perform the essential functions of the
job. Reasonable accommodations may be made to enable individuals
with disabilities to perform the essential functions. While
performing the duties of this job in the plant the employee is
frequently required to stand; walk; use hands to finger, handle or
feel; reach with hands and arms; climb or balance; stoop, kneel,
crouch, or crawl; talk, hear, and smell; pushing pulling, and
reaching with some repetitive motions. The employee must be able to
lift and/or move 50 pounds occasionally, 20 pounds more frequently,
and 10 pounds constantly. Specific vision abilities required by
this job include near vision, distant vision, color vision,
peripheral vision, depth perception and ability to adjust focus.
The work environment characteristics described here are
representative of those an employee encounters while performing the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions. While performing the duties of this job in the
plant the employee is exposed to wet and/or humid conditions;
moving mechanical parts; work at platform elevations; contend with
fumes and/or airborne particles and dust proper respiratory and
vision PPE; contend with outside weather conditions. Some of the
rotary or reciprocating equipment will have vibrations, the nature
of the resins subject employees to some chemical hazards which are
reviewed. The noise level in the work environment is usually
moderate, though some areas require hearing protection, with some
areas a part of a hearing conservation area.Qualifications High
School Diploma Min. 2 years of experience in a manufacturing
environment. Working in high noise area. While performing the
duties of this job in the plant the employee is frequently required
to stand; walk; use hands to finger, handle or feel; reach with
hands and arms; climb or balance; stoop, kneel, crouch, or crawl;
talk, hear, and smell; pushing pulling, and reaching with some
repetitive motions. The employee must be able to lift and/or move
50 pounds occasionally, 20 pounds more frequently, and 10 pounds
constantly. Specific vision abilities required by this job include
near vision, distant vision, color vision, peripheral vision, depth
perception and ability to adjust focus. Associated topics:
assembly, automotive, boiler, cae, mechanical, mechanism,
solidworks, turbine, turbomachinery, vehicle
Keywords: National Oilwell Varco, Bakersfield , Entry Level Manufacturing Operator, Other , Shafter, California
Click
here to apply!
|